Fmax
The most advanced water cooler
-
100% DISINFECTION.
It is a National and European requirement that water coolers shall be sanitary maintained every four (4) months. During the sanitary maintenance – disinfection of EBAC water coolers, a complete 100% disinfection is made. It is a National and European requirement that water coolers shall be sanitary maintained every four (4) months During the sanitary maintenance – disinfection of the EBAC water coolers, a total replacement of all water contact parts is made (taps, reservoir, pipe work, air filters, etc.) with new ones, disinfected which are made within EBAC, in a sterile environment. During the sanitary maintenance, our technicians replace (using disposable gloves) all internal parts (spare parts of sanitary maintenance). Only then are we and you certain that the water cooling machine has been disinfected 100% every time! There are many alternative methods of sanitary maintenance / disinfection such as i.e. chemical cleaning, ozonation, UV light and steam. None of these provide 100% disinfection, as without the total replacement there will still remain points insufficiently sterilized in which will promote a rapid bacterial growth.
Materials approved by EFET (Hellenic Food Authority)
Finally, all parts of the water cooling machine that come into contact with water are made of approved material in order to come into contact with food (i.e. the tank is made of PET). It is the only water cooler that uses the particular material –P.E.T. is the material used for the 0.5 and 1.5 liters bottled water – approved by E.F.E.T. (Hellenic Food Authority), and there are no metal parts, so as to impair the hygiene and the consistency of the water from water damage (cadmium)
Source: Ebac ltd. - CLEAN WATER:: In the competitor’s models of water cooler machines with reservoir, the pocket of air from the environment constantly come into contact with the water with a risk of contamination and bacteria growth.
- WE DON’T DRINK ANY LEAKAGE WATER!
- HEDGE HOG SPIKE:
- COLD WATER PRODUCTION:
- CARBON BLOCK AIR FILTERS:
- DUPLEX DISPONSE NOZZLES:
- HEATED CONTAINER FOR COLLECTING EXCESS WATER:
- INTEGRATED CUP DISPENSER:
- LOW ENERGY CONSUMPTION:
- ERGONOMIC DESIGN:
- BUILT IN WHEELS: : In order for the water cooler machine to be transported safely, with no lifting required. .
- Made in England, where it meets all the latest requirements of the European Union (i.e. CE, safety of electric appliances, material that are allowed to come into contact with foods, etc.).
- Dimensions (with the bottle): Height 1480 mm. x Width 260 mm. x Depth 310 mm.
- Base Dimensions: Height 150 mm. x Width 260 mm x Depth 370 mm.
100% clean water
In the EBAC water cooler machines, the water in the tank is 100% sealed, it does not come into contact with air, thus reducing the risk of bacteria growth. Furthermore, the typical plastic containers in the cooler machines of our competitors, over the passage of time, allow oxygen to penetrate their walls, thus creating a risk of contamination. The PET material, of which the tank is made of, is less porous and does not allow the oxygen to penetrate it.
Any leaks from the bottle, does not end up in the cold water reservoir like in the competitors’ water cooler models, as to contaminate the water of the water cooler machine, but into a separate heated container, where it is evaporated safely into the environment.
In many cases, the user neglects to remove the label from the bottle during its initial installation, and as a result, in the competitors’ cooler machines the spike entered into the cylinder pushes the label into the bottle, resulting in water contamination. In the FMAX (and only in the EBAC water cooler machines), the spike of the tube is designed as a hedgehog and pierces the label, so it is not being pushed up in the water bottle.
Produces 130% more cold water than the competitors’ models. A research has shown that in high consumption, a simple water cooler in perfect conditions can produce up to 8 consecutive glasses of cold water. The FMAC has a large reservoir of 2,5 liters and can produce up to 14 consecutive glasses of cold water..
The water cooler machines have air filters of 2,5m (not allowing the passage of particles of greater volume dimension of 25 millionths of the meter) which filters the ambient air, which enters into the bottle, while producing the water. Only EBAC cooler machines have such powerful air filter.
Only on EBAC water coolers. It prevents the contamination as the user cannot come into direct contact with the point where the produced water flows.
Any drops that drip out of your glass as you are filling it, end up in a heated container where it is evaporated safely. On the contrary, in competitors’ models, the collecting container fills up with standstill water, dust, etc., resulting in creating a source of contamination.
The cups have been fitted with an ergonomic design, with their inlet downwards in order to reduce the contamination risk.
The hot tank of FMAX consumes only 0.3. kWh/day while all other coolers consume 1.00 kWh /day of electric energy. If multiplied, you will see that the hot tank of the competitor models consumes €36,50 yearly, while the FMAX only consumes €1.09! (cost per kWh €0.1). Unlike the coolers of the competitor models, the award-winning electric hot tank of FMAX functions as a vacuum integrated tank and has an additional layer of heat insulation and as a result it does not lose heat and therefore is not overheated so often. More information can be found at http://ebacwatercoolers.com/technology-hot-tank.php.
The water switches are at a high level, therefore no bending is needed.
